Garmin G300 Pilot’s Guide190-00921-00 Rev. E 169Additional FeaturesSystemOverviewFlightInstruments EISCOMInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesIntegratedAutopilot Annun/Alerts Appendix Indexswitching to the localizer inbound with LOC selected as the navigation source onthe CDI, pathways are displayed in green along the localizer and glideslope.If GPS is the selected navigation source on the HSI, the pathways boxes aremagenta. If LOC is the selected navigation source on the HSI, the pathways boxesare green for the ILS. Pathways boxes are not displayed for segments such asheading legs or VOR radials.Pathways - Enroute, Descent, and ApproachClimbs NOTdisplayedby pathwayDescending finalapproach segmentdisplayed by pathwaySelected Altitudeset for DepartureSelected Altitudeset for EnrouteSelected Altitudefor Step DownNon-approach descents NOT displayed by pathwaymiSSeD AppRoAchPathways are displayed at the selected altitude upon activating the missedapproach on the external GPS navigator.FLIGHT PATH MARKERThe Flight Path Marker (FPM), also known as a Velocity Vector, is displayedon the PFD at groundspeeds above 30 knots. The FPM depicts the approximateprojected path of the aircraft accounting for wind speed and direction relative tothe three-dimensional terrain display.The FPM is always available when the Synthetic Terrain feature is in operation.The FPM represents the direction of the flight path as it relates to the terrain andobstacles on the display, while the airplane symbol represents the aircraft heading.