Garmin G300 Pilot’s Guide 190-00921-00 Rev. EAppendix C244SystemOverviewFlightInstrumentsEISCOMInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesIntegratedAutopilotAnnun/AlertsAppendixIndexInstalling an SD Card:1) Insert the card into the slot on the top, right, front of the bezel. Besure the SD Card contacts are facing the display.2) Firmly push the card into the unit. It is not necessary to force the card.3) The unit takes a few seconds to read the card. When the data cardhas been properly installed and accepted, a summary screen noting thecard details appears. Press ENT Key to acknowledge.If you insert an SD Card and get a card format not recognized message, tryremoving the card and reinserting it. If the card is still not recognized, contactGarmin Product Support or your Garmin dealer.Removing an SD Card:1) Push the card into the unit until it stops.2) Release the card. The card should eject for easy removal.3) With the card ejected, pull the card out of the slot.G300 DATABASESThe following databases are included with the G300 depending on the unit(Americas, Atlantic, or Pacific). See the Additional Feature section for informationon AOPA Airport Directory, FliteCharts®, and SafeTaxi®. See the Hazard Avoidancesection for information on Obstacles and Terrain.DatabaseG300Basemap +AOPA Airport Directory +Jeppesen® Navigation Database (NavData™) +FliteCharts ® +SafeTaxi ® +Obstacle +Terrain +Databases
