Garmin G3X Pilot’s Guide190-01115-00 Rev. K129CNS InterfaceSystemOverviewFlightInstruments EISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeatures AFCS Annun/Alerts Appendix IndexVFR CODEThe VFR code can be entered either manually or by pressing the XPDR Softkey,the CODE Softkey, then the VFR Softkey. When the VFR Softkey is pressed, the pre-programmed VFR code is automatically displayed in the code field of the TransponderData Box. Pressing the VFR Softkey again restores the previous identification code.IDENT FUNCTIONPressing the IDENT Softkey sends a distinct identity indication to Air Traffic Control(ATC). The indication distinguishes the identing transponder from all the others onthe air traffic controller’s screen. When the IDENT Softkey is pressed, a white IDENTindication is displayed in the mode field of the Transponder Data Box for a duration of18 seconds.ADS-B OUTWhen configured with an ADS-B Out capable transponder, ‘NO ADSB’ is displayedin yellow, in the Transponder Data Box, if the ADS-B Out broadcast has been manuallydisabled or if the transponder does not have the required GPS data.Transponder isnot broadcastingADS-B Out dataNO ADS-B (Split-Screen PFD Page)
