3-66Garmin G500/G600 Pilot’s Guide 190-00601-02 Rev. JCover TOCForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AIndex4. Turn the small MFD knob to select the desired data item and press ENT.5. Press the small MFD knob to remove the cursor.To restore factory default settings for data fields on the Active Flight PlanPage:1. While viewing the Active Flight Plan Page of the FPL page group, press MENUto display the Active Flight Plan Page Options window.2. Turn the large MFD knob to highlight “Restore Defaults?” and then press ENT.Figure 3-93 Active Flight Plan Page Menu Option Selection to Restore Defaults3.3.1.3 Setting the Altitude Minimums AlerterThe Altitude Alerting function provides the pilot with visual and aural alerts(if interfaced to an audio panel) when approaching the Selected Altitude. Formore details about Minimum Descent Altitude/Decision Height Alerting, referto refer to 2.4.4.1. While viewing the Charts Page of the FPL page group, press the Menu key.With the Set Minimums item highlighted, press ENT.2. With the Minimums Source highlighted, select the Altitude Minimums Alertersource with small MFD knob.Figure 3-94 Minimums Source Selection3. Turn the large MFD knob to highlight the Altitude Minimums value. Turn thelarge and small MFD knobs to change the Altitude Minimums value.Figure 3-95 Minimums Altitude Selection4. Press ENT to activate the selected value.
