5-15190-00601-02 Rev. J Garmin G500/G600 Pilot’s GuideCoverTOCForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix A Index5.1.5.3 Setting the Altitude Minimums Alerter1. While viewing the Chart page of the FPL page group, press the Menu key. Withthe Set Minimums item highlighted, press ENT.2. With the Minimums Source highlighted, select the Altitude Minimums Alertersource with small MFD knob.Figure 5-14 Minimums Source Selection3. Turn the large MFD knob to highlight the Altitude Minimums value. Turn thelarge and small MFD knobs to change the Altitude Minimums value and thenpress ENT to activate the selected value.Figure 5-15 Minimums Altitude SelectionAlerting is inhibited while the aircraft is on the ground and until the aircraftreaches 150 feet above the MDA. The Minimum altitude will be available in theAltitude Alerter.In dual installations, the minimums alerting altitude value may be set fromeither GDU 620 and will be synchronized on both units.NOTE:If you highlight the Minimums Altitude field on the FPL page andpress the CLR key, it will turn the minimums functionality off.
