Garmin GFC 500 Manual

Also see for GFC 500: Maintenance manual

Garmin GFC 500 Manual Manual pdf 40 page image

AFMS – GFC 500 Autopilot in Textron 182 Series 190-02291-06 Rev. 2Page 7–4Disconnect MethodsThe following conditions will cause the autopilot to automatically disconnect:• Electrical power failure, including pulling the AUTOPILOT circuit breaker.• Internal autopilot system failure (including internal AHRS failure).The following pilot actions will cause the autopilot to disconnect:• Pressing the red AP DISC / TRIM INT button on the pilot’s control wheel.• Actuating the manual electric trim switch (if installed).• Pushing the AP Key on the GMC 507 mode controller when the autopilot is engaged.• Pulling the AUTOPILOT circuit breaker.The red AP DISC / TRIM INT button on the pilot’s control wheel will interrupt power to the manual electric trim foras long as the switch is depressed.AUTOPILOT CONTROL UNIT AND DISPLAYFigure 7-3: GMC 507 Control Unit (Reference Only)Figure 7-4: G5 Display (Reference Only)