Garmin GMR 1204 Installation Instructions Manual

Contents

GMR ™ 600/1200 Series Radar Installation InstructionsProperly install your GMR 600/1200 series radar according to the following instructions. If you experience difficulty installing thechartplotter, seek the assistance of a professional installer, or contact Garmin® Product Support.Before installing your GMR 600/1200 series radar, confirm that the package contains the items listed on the box. If any parts are missing,contact your Garmin dealer immediately.WarnInG: Always wear safety goggles, ear protection, and a dust mask when drilling, cutting, or sanding.WarnInG: The selected radar mounting location must be able to hold the weight of the radar and withstand any inertial forces.WarnInG: The radar transmits electromagnetic energy. It is important that the radar is turned off or the DC power input is disconnected whenpersonnel are required to come close to the radar to perform work on the radar assembly or associated equipment. Electromagnetic energy is harmful.CaUTIOn: When the radar is transmitting, do not look directly at the antenna at close range, because the eyes are the most sensitive part of the body toelectromagnetic energy.nOTICe: When drilling or cutting, always check the opposite side of the drilling or cutting surface.Product RegistrationHelp us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original sales receipt, or aphotocopy, in a safe place.Contact GarminContact Garmin Product Support if you have any questions while installing your GMR 600/1200 series radar. In the USA, go towww.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. byphone at +44 (0) 870.8501241.Needed ToolsFor Installing the Radar:#2 Phillips screwdriver5 mm Allen wrenchDrill and drill bitsWrench and socket setFor Installing the Optional Field-Installable RJ-45 Network Connector:KnifePliers15 mm wrenchAMP modular-plug hand tool and die set or compatible equivalent••••••••March 2010 190-01067-02 Rev. D Printed in Taiwan