Garmin GNS 430 Pilot's Manual & Reference

Also see for GNS 430: Specification Pilot's manual Instructions Pilot's guide addendum Pilot's guide addendum

Contents

Garmin GNS 430 Pilot's Manual & Reference Manual pdf 115 page image

107{continued}5. Rotate the small right knob (a) to display a window of available runways. Continue rotatingthe small right knob (a) to select the desired runway. (“ALL” may appear in the runway field,indicating the departure procedure applies to all runways. For airports with parallel runways, “B”may appear at the end of the runway designation to indicate the departure procedure applies toboth runways.)6. Press E. The cursor moves to the transitions (TRANS) field.7. Rotate the small right knob (a) to display a window of available transitions. Continue rotatingthe small right knob (a) to select the desired transition.8. Press E. To remove the flashing cursor, press the small right knob (r).Airport Departure Page OptionsThe following option is available for the airport departure page, by pressing the mkey:Load into Active FPL? allows you to load the selected departure into the active flightplan. This is identical to loading a departure procedure from the procedures page, asdescribed on page 66.To load a departure procedure from the airport departure page:1. Select the desired departure, runway and transition using the steps above.2. Press m to display the airport departure page options.3. Press E to select the “Load into Active FPL?” option.4. The active flight plan page will appear. Press F to return to the airport departure page.WPT PAGESAirport Departures 6pr