Garmin GNS 430 Pilot's Manual & Reference

Also see for GNS 430: Specification Pilot's manual Instructions Pilot's guide addendum Pilot's guide addendum

Contents

Garmin GNS 430 Pilot's Manual & Reference Manual pdf 42 page image

34Map Direct-ToTo designate an on-screen airport, navaid or user waypoint as your direct-todestination:1a. Use the panning function (see previous page) to place the target pointer on a waypoint.2. Press D to display the select direct-to waypoint page, with the selected waypoint alreadylisted.3a. Press E twice to confirm the selection and begin navigating to the waypoint.The direct-to function can be used anywhere on the map. If nothing currently exists atthe crosshair position, a new waypoint (called “+MAP”; shown at left) will be created atthe target pointer location before the direct-to is initiated.Airspace Information on the MapWhen a special-use or controlled airspace boundary appears on the map display, youcan quickly retrieve information — such as floor/ceiling limits and controlling agency— directly from the map.To view airspace information for an on-screen special-use or controlled airspace:1b. Use the panning function (see previous page) to place the target pointer on an open area withinthe boundaries of an airspace. If the area is congested and it is difficult to select an open area,you may need to zoom in or p ress c to make the selection easier.2. Press E to display an options menu.3b. “Review Airspace?” should already be highlighted, if not select it with the small right knob (a).Press E to display the airspace information page for the selected airspace.4. To display the com frequency(s) for the controlling agency, rotate the large right knob (d) tohighlight “Frequencies?” and press E. Press c to return to the airspace informationpage.5. Press c to exit the airspace information page.NAV PAGESMap Page2pbna