MessagesApproaching Turn: You are nearing a turn in a route.Arriving at Destination: You are nearing your destination.Batteries Low: The battery needs to be recharged.Can’t Unlock Maps: No applicable unlock code for one or more maps wasfound. All MapSource maps are not accessible.Database Error: Internal problem with the unit. Contact your dealer or GarminProduct Support to have the unit repaired.Deep Water: The water is deeper than the amount set in the Deep Water Alarm.Dragging Anchor: The distance set in the Anchor Drag Alarm is exceeded.Lost Satellite Reception: The unit is unable to receive satellite signals.Memory Full: Unit memory is full, no further data can be saved.Near Proximity Point: You have reached the distance set for a proximitywaypoint.No Diff GPS Location: RTCM is selected but the unit is not receiving DGPSdata.None Found: No data matched the search criteria.No Tide Stations for that Area: No tide stations within 100 miles of the area.Off Course: You are off course by the distance set in the Off Course Alarm.Proximity Memory Full: No additional proximity waypoints can be saved.Proximity Radius Overlaps: The radius of two proximity waypoints overlap.Route Already Exists: You have entered a route name that already exists.Route Memory Full: No additional routes can be saved.Route Truncated: Uploaded route from another device has more than 50waypoints.Route Waypoint Memory Full: No additional route waypoints can be saved.Shallow Water: The water is shallower than the amount set in the ShallowWater Alarm.Track Already Exists: A saved track with the same name already exists.Track Log Full: The track log is full and track recording has been turned off.In order to record more track points, you will need to clear the track log andturn track recording on.Track Memory Full: No more track data can be stored. Delete the old trackdata to store the new data.Track Truncated: A complete uploaded track will not fit in memory. Theoldest track log points have been deleted.Transfer Complete: Data transfer has been completed.Waypoint Already Exists: A waypoint with the same name already exists.Waypoint Memory Full: The unit has stored the maximum number ofwaypoints.GPSMAP 276C Owner’s Manual 115APPENDIX > M ESSAGES
