![Garmin GPSMAP 276C Owner's Manual Manual pdf 68 page image](https://manuals-archive2.s3.amazonaws.com/5093185/0ac9cb5be05408dfc6ad07397421f28068f.jpg)
To create a new route:1. Press the NAV key to open the Navigate Menu.2. Highlight New Route and press ENTER.3. From the Find Menu, highlight Waypoints and press ENTER.(You may also choose to go to other points, such as Cities orTide Stations from this list. The steps vary only slightly fromthose listed for Waypoints.)4. Select a waypoint from the list and press ENTER to displaythe Waypoint page.Waypoint Review PageActivating a Go To using the Find Menu5. The Waypoint page automatically opens. With the Go Tobutton highlighted, press ENTER to begin navigation.To go to a destination using the Find Menu:1. Press FIND to open the Find Menu.2. Using the Rocker key, highlight the desired category, suchas Cities, and press ENTER.3. Press ENTER and use the Rocker key to begin entering theletters contained in the item name. The list begins to sort bythe items which contain the letters you are entering. PressENTER when finished.Finding an item using the Containing field: The unit searches for itemscontaining the letter combination you enter and displays them in the list.3. Highlight the desired item from the list and press ENTER.4. Press ENTER when the Go To button is highlighted.For complete information about finding an item, refer to the“Finding an Item” section on page 18.60 GPSMAP 276C Owner’s ManualBASIC OPERATION IN AUTOMOTIVE MODE > N AVIGATING IN AUTOMOTIVE MODE