Garmin GPSMAP 3006C Owner's Manual

Also see for GPSMAP 3006C: Specification Install guide Installation instructions Owner's manual Quick reference guide

Contents

53Getting StartedMain Page Sequence53ReferencePlanning RoutesThe Route Review ‘Numbers’ list displays trip-planning information for each leg or the entire route.You may access the Planning setup from either Route Review list and the data may be viewed from theRoute ‘Numbers’ list only. The far right data column may be changed to display ETA (Estimated Time ofArrival at point), Fuel (to point), Leg Distance, Leg Fuel, Leg Time, Sunrise and Sunset (at point location)and Time To (point).To use the Plan Route feature:1. From the Route Review list, use the ARROW KEYPAD to highlight the ‘Plan’ button and press ENTER todisplay the Plan Route page.2. To enter planning information figures for Speed, Fuel Flow, Departure Time, and Departure Date.3. Press QUIT to return to the Route Review Page.To change the data column Plan Route feature:1. From the Route ‘Numbers’ list, highlight the adjustment button to the right of the “Course” and pressENTER. The middle title highlights in yellow.2. One of nine available planning figures appears to the right of each route waypoint and its distance. Use theLEFT/RIGHT keys on the ARROW KEYPAD to select the desired item and press ENTER when done.NOTE: Fuel fl ow rates on your unit are measured in “units per hour”. System settingchanges for units of measure (statute, nautical or metric) do not affect the fuel fl ow mea-sure. You should enter fuel fl ow rates based upon available information for your vehicle(operator’s manual, performance specifi cations, etc.) and make note of the desired units ofmeasure (gallons, liters, etc.). Once selected, press LEFT or RIGHTon the ARROW KEYPAD to changethe data fi eld.Trip Planning Data FieldsPlanning a Route+