To edit the route on the map:1. Highlight the Route tab on the Main Menu.2. Select a route, and press ENTER. Press MENU to open theRoute Review Page options menu.3. Highlight Edit on Map, and press ENTER.4. Select a location on the route (the route turns red when thearrow is over the route), and press ENTER.5. Use the ROCKER to drag the route to the new point location,and press ENTER.Editing the route on the map6. Repeat steps 4 through 5 until all points are added to theroute. Press QUIT when finished.You can enter information about your trip so the GPSMAP 376C canestimate information about your trip.To plan your route:1. Open the Route Review Page options menu.2. Highlight Plan Route, and press ENTER.Entering Speed and Fuel Flow for trip planning3. Enter the data for Speed and Fuel Flow. You can also enterthe date and time of your departure. Press QUIT to return tothe Route Review Page.NOTE: Fuel flow rates are measured in “units per hour.” Systemsetting changes for units of measure (statute, nautical or metric)do not affect the fuel flow measure. You should enter fuelflow rates based on information for your vehicle (such as theoperator’s manual or performance specifications), and make noteof the units of measure (gallons or liters).GPSMAP 376C Owner’s Manual 23M ARINE MODE > C REATING AND USING ROUTES190-00508-00_0C.indd 23 11/6/2006 9:47:28 AM
