3 GPSMAP 5000 Series Owner’s ManualViewing InformationVieWinGinformationViewing the DSC ListNote: Your chartplotter must be connected to a VHF radio that supports DSC (Digital SelectiveCalling) in order to view the DSC List.The DSC List is a log of the most-recent DSC calls and other DSC contacts you have entered. TheDSC List can contain up to 100 entries. The DSC List shows the most-recent call from a boat. Ifa second call is received from the same boat, it replaces the first call in the Call List. For moreinformation on DSC, see page 55.To view the DSC List, from the Home screen, touch Information > DSC List.Viewing GaugesNote: You must be connected to a NMEA (National Marine Electronics Association) 2000 networkcapable of sensing engine data to view the gauges. See the GPSMAP 4000/5000 Series InstallationInstructions for details.From the Home screen, touch Information > Dashboard Gauges.To select analog or digital gauges:Note: For more than two engines, you can only use the digital gauges. For one or two engines, youcan switch between analog and digital gauges.1. To view the Gauges from the Home screen, touch Information > Dashboard Gauges > Engine> Menu.2. Select Digital or Analog.Viewing Fuel GaugesNote: To view fuel information, your chartplotter must be connected to an external fuel sensor, such asthe Garmin GFS™ 10.From the Home screen, touch Information > Dashboard Gauges > Fuel. Fuel flow for eachengine, total fuel flow, fuel level in each tank, total fuel remaining, fuel economy, engine trim, boatspeed, engine RPM, and the range for your boat are displayed.To synchronize your fuel gauges with your fuel:1. From the Home screen touch Information > Dashboard Gauges > Fuel.2. Touch Menu.3. Select an option:Fill Up All Tanks—select when your tank is full. An estimate of the total fuel is shown. Adjustif necessary.•