GPSMAP 5000 Series Owner’s ManualGetting StartedGettinGS tarted Restoring the Original Factory SettingsCaUtioN: This procedure deletes any information you have entered.1. From the Home screen, touch Configure > System > System Information > Factory Settings> Reset.2. Select an option:Touch Yes to restore all factory settings.Touch No to exit without restoring factory settings.Viewing System InformationYou can view the software version, basemap version, unit ID number, and your XM WX Weather®radio ID (if available). You may need this information to update the system software or purchaseadditional map data information.From the Home screen, touch Configure > System > System information.Using the Simulator ModeSimulator mode turns the GPS receiver off for use indoors or for practice. The chartplotter does nottrack satellites in simulator mode.CaUtioN: Do not try to navigate using simulator mode because the GPS receiver is turned off. Anysatellite signal strength bars shown are only simulations and do not represent the strength of actualsatellite signals.1. From the Home screen, touch Configure > System > Simulator > On.2. Touch Setup to set speed, track control (simulated heading), position, simulator time, andsimulator date.••
