2 GPSMAP 5000 Series Owner’s ManualGetting StartedGettinGS tarted Turning the Chartplotter OnNote: The first time you power on your chartplotter, you must go through a setup sequence. See“Initializing Chartplotter Settings”.1. Press and release the Power key. After a few moments, the Warning screen appears.Warning Screen Home Screen2. Touch I Agree to open the Home screen.Turning the Chartplotter OffTo turn the chartplotter off, press and hold the Power key.Initializing Chartplotter SettingsThe first time you turn your chartplotter on, you must configure a series of initial settings. Thesesettings must also be configured when restoring factory settings (page 4). All of these settings can beconfigured later from the Configure screen (page 36).The initial settings are as follows:Language—touch the language that you want shown on your screen.Welcome—touch oK.Position Format—specify the coordinate system to use for location readings.time Format—select 12-hour, 24-hour, or UtC (Universal Time Code) to specify the formatin which time is displayed.time Zone—select your time zone.Units—select Statute, Metric, or Nautical to specify units for on-screen measurements.Minimum Safe Depth—specify the minimum safe depth for your boat. Refer to your boatspecifications for more information.Minimum overhead Clearance—specify the minimum overhead clearance for your boat. Referto your boat specifications for more information.••••••••
