Garmin GPSMAP 5215 Owner's Manual

Also see for GPSMAP 5000 Series: Configuration guide Owner's manual Template manual Printing guide Printing guide

Contents

Garmin GPSMAP 5215 Owner's Manual Manual pdf 62 page image

58 GPSMAP 5000 Series Owner’s ManualDigital Selective CallingdSCTo turn trail lines off for tracked vessels:1. From a chart screen, touch Menu > Other Vessels > DSC > DSC Trails.2. Touch Off to turn trails off for every vessel.To show or hide the trail line for a specific vessel that is sending position reports:1. From the Home screen, touch Information > DSC List.2. Select the vessel from the list, and then touch Review.3. Touch Trail to show or hide the trail for the vessel on the Navigation chart.To change the symbol and color of the trail line for a vessel:1. From the Home screen, touch Information > DSC List.2. Select any call from that vessel from the list, and then touch Review > Edit.3. Select an option:Touch Symbol to edit the symbol.Touch Trail Line to edit the line color.Placing an Individual Routine CallWhen you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, youcan use the chartplotter interface to set up an individual routine call. When setting up an individualroutine call from your chartplotter, you can select one of the following channels on which you wantto communicate. The radio transmits this request with your call.The selection of a DSC channel is limited to those channels that are available in all frequency bands:6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77.Note: The default channel is 72. Select Channel to select a different channel from the list. If youselect a different channel, the chartplotter will use that channel for subsequent calls until you call using adifferent channel.To make an individual routine call:1. While viewing a chart, touch Menu > Other Vessels > DSC List.2. Select the station to call from the list.3. Touch Review > Call with Radio.4. Touch Send to send the information about the call to the radio.5. On your Garmin VHF radio, select Call.Note: When initiating a call from the chartplotter, if the radio does not have an MMSI numberprogrammed, the radio will not receive call information.Calling an AIS TargetWhen you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, youcan use the chartplotter interface to set up an individual routine call to an Automatic IdentificationSystem (AIS) target. For more information on selecting a channel other than the default channel(Channel 72), see “Placing an Individual Routine Call.”To make an individual routine call to an AIS target:1. While viewing a chart, touch an AIS target .2. Touch AIS Vessel > Call with Radio.3. Touch Send to send the information about the call to the radio.4. On your Garmin VHF radio, select Call.••