14-6 Garmin GTN 625/635/650 Pilot’s Guide 190-01004-03 Rev. BForewordGettingStartedXpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafficTerrainWeatherNearestMusicUtilitiesSystemMessagesSymbolsAppendixIndex14.1.3 Vertical Speed (VS) ProfileThis value sets the vertical speed.1. While viewing the VCALC page, touch the VS Profile key.NumericKeypadSelectedVerticalSpeedBackspaceKeyTouch Enter OrPress Small KnobTo Save ValueFigure 14-7 Select VCALC Vertical Speed2. Use the numeric keypad to select the desired Vertical Speedand then touch the Enter key.14.1.4 Target OffsetThe Target Offset is a pilot-selected distance value that represents thegeographical location where you wish to arrive at the target altitude. Thisdistance is measured from the Target Waypoint and, in a separate data field onthe VCALC page, designated as either before or after the Target Waypoint.1. While viewing the VCALC page, touch the Offset key.NumericKeypadSelectedTargetOffsetBackspaceKeyTouch Enter OrPress Small KnobTo Save NumberFigure 14-8 Select VCALC Target Offset2. Use the numeric keypad to select the desired Target Offset andthen touch the Enter key.
