14-9190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot’s GuideForewordGettingStartedXpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafficTerrainWeatherNearestMusicUtilitiesSystemMessagesSymbolsAppendixIndex14.2 Flight TimersThe Flight Timers function provides count up/down timers, plus automaticrecording of departure time, and total trip time. Departure and total trip timerecording can be configured to run either any time unit power is on, or only whenyour ground speed exceeds the in-air threshold set by the installer (for example,30 knots). A flexible Generic Timer is available for general timing needs.NOTE: When a count up timer is used, the preset value has no function.1. While viewing the Utilities page, touch the Flight Timerskey.2. If the Generic Timer Direction counter is set to "Up," the ResetTimer key will be shown and when touched will return thetimer to 00:00:00. If the Direction counter is set to "Down,"the Preset Timer key will be shown and the key will return thetimer to the Preset time value.SelectedCounterDirectionStart/Stop Generic TimerReset orPreset TimerSelect PresetTimeElapsedTimeTouch ToToggle TimersFigure 14-11 Utility Flight Timers Page (Generic Timer)3. Touch the Trip/DEP Timers or Generic Timer keys to togglebetween the timer types.Departure Time(Local Time)ElapsedTimeSet Departure TimeTo Current LocalTime Of Timer StartSelectCriteria ForTimer StartReset TimerTouch ToToggle TimersFigure 14-12 Utility Flight Timers Page (Trip/DEP Timers)4. Touch each key as desired to set up timer operation.
