14-7190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot’s GuideForewordGettingStartedXpdr CtrlCom/NavFPLDirect-ToProcWpt InfoMapTrafficTerrainWeatherNearestMusicUtilitiesSystemMessagesSymbolsAppendixIndex14.1.5 Before/After Target WaypointThis setting designates whether the offset distance defines a point before youreach the target reference waypoint or after you reach the waypoint. The “After”selection is not available for the last waypoint in a flight plan.1. While viewing the VCALC page, touch the Before/Afterkey.2. Touching the Before/After key will toggle between Beforeand After the Target Waypoint.14.1.6 Target WaypointSelect the waypoint in the flight plan that will be used for planning a descent.When using a flight plan, the target waypoint is a reference that can be specifiedfrom the waypoints contained in the flight plan. By default, the last waypoint inthe flight plan is selected.1. While viewing the VCALC page, touch Target Waypoint.Figure 14-9 Select VCALC Target Waypoint List2. A list of the remaining waypoints in the flight plan will beshown. Touch the desired waypoint to select it as the TargetWaypoint.
