Garmin PERSONAL NAVIGATOR GPS 95 XL Owner's Manual

Contents

3-16· Select the desired waypoint category (airport, VOR or NDB only) bypressing CLR (repeatedly).· Press the right arrow key twice to place the cursor on the facility name.· Enter the starting letter, or letters, of the facility name. You may limitthe scan to the desired level by designating the number of startingletters (as described previously when scanning by identifier).· Press WPT/SUA to begin scanning.· Press the right arrow key to sequence through the available waypoints.If you pass the desired waypoint, you may press the left arrow key toscan backwards through the list.· Once the desired waypoint is selected, press ENT to accept thewaypoint and complete the scan. The GPS 95 will revert to the pagethat you were on prior to scanning. The selected waypoint will bedisplayed on the waypoint identifier field.NOTE: When duplicate entries exist for the selected item (identifier/city/facility name), the additional entries may be viewed by continuing to pressthe arrow keys until the desired waypoint is selected.3.11 REVIEWING WAYPOINTSThe GPS 95 allows you to quickly review waypoint information withoutentering the waypoint identifier. For example, you may review informationregarding the waypoints in a route, or review the definition of the nearestwaypoints. In general, if the cursor is over a waypoint identifier, you mayquickly review the information about that waypoint.To review a waypoint definition...· Place the cursor over a waypoint identifier (using the arrow keys) andpress ENT. The Waypoint Definition Page is displayed indicating thecategory of waypoint shown.