Road Tech ™ zūmo 665 Owner’s Manual 5AppendixProblem/Question Solution/AnswerMy phone will notconnect to the zūmo.Touch Tools > Settings > Bluetooth. Verify that the Bluetooth field is set to Enabled.Ensure your phone is turned on and is less than 33 feet (about 10 meters) away from your zūmo.Go to www.garmin.com/bluetooth for more help.How do I know myzūmo is in USB massstorage mode?When your zūmo is in USB mass storage mode, a picture of a zūmo connected to a computer is shown. Also,you should see two new removable disk drives listed in My Computer.My computer neversenses that the zūmo isconnected.1. Unplug the USB cable from your computer.2. Turn the zūmo off.3. Plug the USB cable into your computer and your zūmo. The zūmo automatically turns on and goes intoUSB mass storage mode.I cannot see any newremovable drives in mylist of drives.If you have several network drives mapped on your computer, Windows may have trouble assigning driveletters to your zūmo drives. See the operating system Help file to learn how to map/assign drive letters.I cannot get trafficinformation.Verify that you are in a coverage area. You must be in a coverage area to get the traffic information for thatarea.Verify that the FM TMC Traffic receiver is connected to the power connector on the cradle and also connectedto a power outlet in your vehicle.