Garmin SOUNDER 125 Owner's Manual & Reference

Contents

To flush mount the GPS 125 Sounder:The GPS 125 Sounder can be mounted flush with aflat panel of .08-.52” thickness using the cam lobe fea-ture on its mounting bracket.1. Cut a 4.15” W x 4.67” H hole in panel.2. Place GPS 125 Sounder into hole from the front untilits flange rests against the mounting surface.3. From the back side of the panel, loosely attach thebracket such that the slot in the ratchet area pointsaway from the mounting panel.4. Rotate the bracket downward until the panelis pinched tightly between the units flangeand bracket lobe.5. Tighten knobs and connect the power/data, antenna,and transducer cables.69APPENDIX AInstallation