Garmin aera 500 Series Pilot’s Guide 190-01117-02 Rev. C30OverviewOverviewGPS NavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndexEntering a new location:1) From the 'Home' Screen, touch Position > Menu > New Location.2) Touch 'Use Map', or 'Use Identifier'.3) After selecting your approximate position using the map pointer or enteringan identifier, touch OK.4) The GPS Receiver will begin a new search based on the location entered.SIMULATOR MODESimulator Mode is helpful for practicing with the unit indoors or when no satelliteor XM signals are available. All waypoints and routes created in Simulator Mode areretained in memory for future use.NOTE: Do not attempt to navigate using Simulator Mode. When the unit isset to Simulator Mode, the GPS receiver is turned off. Any Satellite SignalStrength Bars shown are only simulations and do not represent the strengthof actual satellite signals.Starting/Stopping Simulator Mode:From the 'Home' Screen, touch Position > Menu > Start/Stop Simulator.Adjusting the simulated altitude, track, speed, waypoint, & posi-tion:1) From the 'Home' Screen, touch Position > Menu > Start Simulator.2) Touch the 'GPS simulator is on (for use indoors)' message to remove it.3) Touch Menu > Drive Simulator.4) Enter the desired data by touching the fields or using the +/- buttons.Refer to Section 1.4 'Data Entry' for more information.Simulator Mode
