Garmin eTrexLegend TM Owner's Manual

Also see for Etrex Legend - GPS Receiver: Declaration of conformity Specification sheet Quick start guide Tutorial Owner's manual and reference guide

Contents

39Navigating a Route on theMap PageNavigation Page withBearing PointerMain MenuRoutes Optionsthe line becomes thin. Press in on the CLICK STICKto display the word ‘ADD’ next to the line.3. Drag the line to a map item or other location whereyou want to establish a new waypoint and thenpress in on the CLICK STICK to place the newwaypoint. A waypoint information page displays.Press the on-screen ‘OK’ button to save the newwaypoint, then press it again after returning to theRoute Map.To review or remove a route waypoint:1. Select the Route from the Routes List and press theCLICK STICK in to display the Route Page.2. Use the CLICK STICK to highlight the desired routeand press in to display the Route Page for thatroute.3. Use the CLICK STICK to move the map panningarrow to the waypoint you want to review and pressin to pop-up the Options Menu. Select ‘Review’ or‘Remove’ and press in again to either display theInformation Page or remove it from the route.To view the next waypoint in the route:1. Follow Steps 1 and 2 above.2. Place the map panning arrow on the waypoint youare currently viewing and press in to display theOptions Menu. Select ‘Next’ and press in again toview the next waypoint.Adding a new waypoint withina RouteNavigating a RouteA Route can be navigated using the Map Page or theNavigation Page. The Map Page displays your movement,the route line, and waypoints on the route. The Naviga-tion Page shows compass direction and a bearing pointer.To navigate a route:1. Select a route from the Routes List and then press inon the CLICK STICK to display the Route Page.2. Highlight the on-screen ‘Navigate’ button at the