40 iQue 3600a Que Applications GuideQueWeight & BalanceQueWeight & Balance may be used duringyour pre-flight preparations to calculate thetotal weight, moment, and center of gravity(CG) figures.Before entering the various figures, you need todetermine the basic empty weight of the airplaneand the arm (or “station”) for each weight entered.These figures should be determined using thepilot’s operating handbook for your airplane. Thepilot’s operating handbook will also note the weightlimitations and fore/aft CG limits. Compare thosefigures to the values calculated by the iQue 3600a.To open QueWeight & Balance, display the QueApplications Launcher by pressing ESCAPE.Highlight QueWeight & Balance and press ENTER.Entering the Aircraft ProfileBefore you perform Weight and Balance operations,you should enter your aircraft profile. Define thecruising speed, maximum speed, and fuel flow forup to ten aircraft that you regularly fly in AircraftProfile Preferences. Cruising speed and fuel flow areused as default settings when viewing trip planninginformation on the Active Route page. The maximumspeed figure is used to define the range for airspeed inQueNav and is automatically updated if you exceedthis figure.Aircraft Profile PreferencesSelect thecurrent Aircraftfrom the list.Enter theaircraft’sinformation.ADVANCED AVIATION OPERATION > QUE WEIGHT & BALANCE
