Gastroback 42526 Design Multicook Plus Operating Instructions Manual

Gastroback 42526 Design Multicook Plus Operating Instructions Manual Manual pdf 15 page image

57the program is selected. The LED-display shows the default values for the temperature andcooking time.4. Use the ›Timer / t °C‹-button to reach the time selection mode. The minute indicator flashes.Use the › + ‹ and › – ‹-buttons to adjust the time. With the ›Hour / Min‹-button you can switchbetween hours and minutes. The LED-display shows the pre-set cooking time 1 hour. You canadjust the cooking time from 10 minutes to 12 hours.5. If necessary, adjust the Auto-Start-Function to start cooking later.6. Press and hold for a few seconds the ›Start / Keep Warm on / off‹-button to start the appli-ance. The ›Start / Keep Warm on / off‹-button lights up and the countdown of the cooking timeis shown in the time indicator.7. The Keep-Warm-Function turns on automatically, immediately after the program is over. Ifnecessary, this function can be switched off by pressing and holding the ›Start / Keep Warmon / off‹-button at any time.8. After completion of the program an acoustic signal will sound. Depending on the settings ofthe appliance, the Keep-Warm-Function will launch (the LED-display counts up the time) or theappliance will return to standby mode.9. To cancel the selected program, to interrupt the cooking process or the Keep-Warm-Functionpress and hold the ›Cancel / Keep Warm‹-button for a few seconds.program BakeRecommended for baking various dishes. The setting range of the time is 20 minutes to 8 hoursin 5-minute steps.The 24-hour Auto-Start-Function is available for this program.1. Prepare the ingredients according to the recipe. Place these evenly in the inner pot andinsert the inner pot into the housing. Please make sure that all ingredients, including liquids,are below the ½-mark (2 l) on the inner surface of the inner pot. Make sure that the inner potis firmly in contact with the heating element.2. Close the lid until it clicks into place. Connect the appliance to the power outlet.3. Press the ›Menu‹-button or the › + ‹ and › – ‹-buttons to selectthe program ›Bake‹. Once ›Bake‹ flashes on the LED-displaythe program is selected. The LED-display shows the defaultvalues for the temperature and cooking time.4. Use the ›Timer / t °C‹-button to reach the time selectionmode. The minute indicator flashes. Use the › + ‹ and › – ‹-buttons to adjust the time. With the›Hour / Min‹-button you can switch between hours and minutes. The LED-display shows thepre-set cooking time 60 min. You can adjust the cooking time from 20 minutes to 8 hours.5. If necessary, adjust the Auto-Start-Function to start cooking later.6. Press and hold for a few seconds the ›Start / Keep Warm on / off‹-button to start the appli-ance. The ›Start / Keep Warm on / off‹-button lights up and the countdown of the cooking timeis shown in the time indicator.7. The Keep-Warm-Function turns on automatically, immediately after the program is over. Ifnecessary, this function can be switched off by pressing and holding the ›Start / Keep Warmon / off‹-button at any time.