Gastroback Vital Juicer Pro Operating Instructions Manual

Also see for Vital Juicer Pro: Operating instructions

any other utensils to push down the food. Do not push down the food too fast and vigo-rously. Do not allow the pulp container to overfill, as this may prevent correct operationor damage the appliance. When juicing hard fruits and vegetables and/or pushing downthe food with firm pressure, the motor could stall or stick during operation. In this case,immediately switch OFF (power switch position on '0') and unplug the appliance to avoidoverheating. (See ›Trouble Shooting Guide‹).• Do not leave any food dry on the surfaces of the appliance. If pulp is left to dry onthe filter basket, it may clog the filter mesh and, as a result, decreasing the performanceof the juicer. In this case, soak the filter basket in hot soapy water to remove any driedpulp before use (see ›Care and cleaning‹). Do not use any abrasive cleaners or cleaningpads to avoid damage. Never use hard or sharp objects to work with the device or usefor cleaning. Always handle with care. Do not place the motor base or power cord in anautomatic dishwasher or under a tap!• Do not use the appliance for chopping, slicing or shredding of hard foods andnutrients (i.e. nuts or chocolate). Do not use for mincing meat or pureeing.Important safeguards for all electrical appliances• Ensure that the voltage rating of your mains power supply corresponds to the voltagerequirements of the appliance (230 V, 50 Hz, AC). Always connect the appliance directlyto a mains power supply wall socket with protective conductor (earth/ground) connectedproperly. The installation of a current safety switch with a maximum rated operating of30 mA in the supplying electrical circuit is recommended. If in doubt, contact your localelectrician for further information. Maximum power consumption: 700 Watt. Do not useany extension cord or multiple socket.• Do not immerse the motor base or power cord in water or any other liquid. Do notpour or drip any liquids on the motor base or power cord. When liquids are spilledon the motor base, immediately switch off (power switch position '0') and unplug theappliance and dry the motor base.• Always place the appliance on a stable, even, dry and sufficiently large surface. Donot place any cloth or tissues under or on the appliance to avoid risk of fire and electricshock. Do not place the appliance near the edge of the table or counter. Do not let theplug or power cord hang over the edge of the table or counter. Take care that no onewill pull the appliance by the power cord, especially when young children are near.Never touch the appliance or any part of it during the appliance is working, because thesurface is getting hot. Do not place the appliance and any part of it on or near hot surfaces, (i.e. burner, heater or oven).• Do not leave the appliance unintended while connected to the power supply. Alwaysswitch OFF ('0') and unplug the appliance if it is not in use and before moving, cleaningand/or assembling or disassembling.• Always handle the power cord with care. Do not pull or strain the power cord. Thepower cord may never be knotted or squeezed. Always grasp the plug to disconnectthe power cord from the power outlet. Do not let the power cord hang overthe edge of the table or counter. Take care not to entangle in the power cord.• Always ensure that the power switch is in OFF-position '0', before connecting theappliance to the mains power supply.28