Section 3 • Scheduled Maintenance ProceduresREV BNovember 2008Part No. 112657 GS-2668 RT • GS-3268 RT 3 - 9A-4Perform Engine MaintenanceEngine specifications require that this procedurebe performed every 8 hours or daily, whichevercomes first.Required maintenance procedures and additionalengine information is available in theKubota D1105 Operator's Manual(Kubota part number 16622-89166) OR theKubota D905 Operator's Manual(Kubota part number 16622-8916-5) OR theKubota DF752 Operator's Manual(Kubota part number EG601-8916-1) OR thePerkins 403D-11 User's Handbook(Perkins part number SEBU8311-01) OR thePerkins 403C-11 User's Handbook(Perkins part number 100816460).Kubota D1105 Operator's ManualGenie part number 131379Kubota D905 Operator's ManualGenie part number 84240Kubota DF752 Operator's ManualGenie part number 84250Perkins 403D-11 User's HandbookGenie part number 131661Perkins 403C-11 User's HandbookGenie part number 97360A-5Inspect the Engine Air FilterGenie specifications require that this procedure beperformed every 40 hours or weekly, whichevercomes first.Maintaining the engine air filter in good condition isessential to good engine performance and servicelife. Failure to perform this procedure can lead topoor engine performance and component damage.1 Kubota D1105 and D905 models: Pull up onthe engine tray locking pin, located under theradiator on the engine pivot tray. Swing theengine pivot tray out and away from themachine for access.2 Kubota D1105 and D905 models: Remove thewingnut securing the end cap to the air cleanercanister. Remove the end cap.All other models: Disconnect the retainingclamps securing the end cap to the air cleanercanister. Remove the end cap.3 Remove the air filter element.4 Clean the inside of the air filter canister and thecanister gasket with a damp cloth.5 Inspect for and remove any blockage or debrisfrom the intake air passages.CHECKLIST A PROCEDURES
