Genie WHDSDI16 User Manual

Contents

Genie WHDSDI16 User Manual Manual pdf 20 page image

DVR User Manual143 Basic Function Instruction3.1 Startup & ShutdownPlease make sure all the connections are done properly before you power on the unit. Proper startup and shutdown are crucial to expandingthe life of your DVR.3.1.1 StartupStep1: Connect with the source power.Step2: The device will boot and the power LED will turn blue.Step3 A WIZZARD window will be pop-up and show some information about time zone，time setup，network configuration, recordconfiguration and disk management. User can setup here and refer to the concrete setup steps from the corresponding chapters. If usersdon’t want to setup Wizard, please click Exit button to exit.Note: This DVR can only display options on either VGA/HDMI monitor or CVBS monitor at a given point of time. If there is live imagedisplay without menu options, please check if there is display on other device/monitor, or hold down ‘Exit’ button. Holding down Exitkey can switch the output between CVBS and VGA/HDMI.3.1.2 ShutdownYou can shut down the device by using IR remote controller and mouse.By IR remote controller:Step1: Press Power button. This will bring up a shutdown window. Then the unit will shut down by clicking “OK” button.Step2: Disconnect the power.By mouse:Step1: Enter into Menu and select “Shut Down” icon. This will take you to a shutdown window.