Genie WHDSDI16 User Manual
                                                                                                            | |
Contents
| 
DVR User Manual214.2 Live ConfigurationLive configuration includes three submenus: live, main monitor and mask.4.2.1 LiveIn this tab, user can setup camera name.Step1: Enter into MenuSetupLiveLive tab. Refer to Fig 4-6:Note: A soft keyboard will pop up by clicking the camera name. User can self-define thecamera name.Step2: Checkmark the Show Name when you set your camera name.Click “Default” button to restore the default setting, click “OK” button to save thesetting.Step3: Select “All” to setup the same settings for all channels.Fig 4-6 Live Configuration-Live4.2.2 Main MonitorStep1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig 4-7:Step2: Select split mode: 1×1, 2×2 and channel. Click button to setup the previouschannel group. Click button to set the latter channel group.Step3: Set the dwell time.Step4: Click “Default” to restore default setting; click “Apply” to save the setting; click“Exit” to exit the current tab.Fig 4-7 Live Configuration-Main Monitor4.2.3 MaskYou can setup private mask area on the live image picture. For a given channel a maximum of three areas can be masked.Setup mask area: click setting button, enter into live image to press left mouse and drag mouse to set mask area. Please refer to the below |
Related manuals for Genie WHDSDI16
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine