Genie WHDSDI16 User Manual
                                                                                                            | |
Contents
| 
DVR User Manual33password. Once the setup is completed, your DVR will automatically dial up into your network.Step 4: No matter what kinds of way to connect internet, you should test the effectiveness of the network by clicking “Test” button afteryou setup the network.Step 5: If the network is well connected, please click “Apply” button to save settings.4.6.2 Sub-streamStep 1: Enter into MenuSetupNetwork Sub-stream tab. Refer to Fig 4-28:Step 2: Select fps, resolution, quality, encode and max bit rateStep 3: Select “All” to set the same settings for all channels.Fig 4-28 Network Sub-stream4.6.3 EmailStep 1: Enter into MenuSetupNetworkEmail tab. Refer to Fig 4-29:SMTP Server/Port: The name and port number of SMTP server. Check the SSL checkbox if the server requires a secure connectionParameter MeaningFPS Range from: 1-6 (PAL)Resolution Support CIFQualityThe higher the value is, the clearer therecord image. Six options: lowest, lower,low, medium, higher and highest.Encode VBR and CBRMax Bitrate Range from: 256kbps~1792kbps |
Related manuals for Genie WHDSDI16
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine