Genie Z-62/40 TRAX Operator's Manual

Also see for Z-62/40 TRAX: Maintenance manual Maintenance manual Maintenance manual Operator's manual supplement

Contents

Operator's Manual First Edition • Second PrintingTransport and Lifting Instructions54 Z ® -62/40 TRAX™ Part No. 1272873GTTrans port and Lifti ng Instr ucti onsObserve and Obey: Genie provides this securement information asa recommendation. Drivers are solelyresponsible for making sure machines areproperly secured and the correct trailer isselected pursuant to US Department ofTransportation regulations, other localizedregulations, and their company policy. Genie customers needing to containerize anylift or Genie product should source a qualifiedfreight forwarder with expertise in preparing,loading and securing construction and liftingequipment for international shipment. Only qualified aerial lift operators should movethe machine on or off the truck. The transport vehicle must be parked on alevel surface. The transport vehicle must be secured toprevent rolling while the machine is beingloaded. Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. Genie lifts are very heavyrelative to their size. See the serial label for themachine weight. See the inspections sectionfor the serial label location. Be sure the turntable is secured with theturntable rotation lock before transporting. Besure to unlock the turntable for operation. Do not drive the machine on a slope thatexceeds the uphill, downhill or side slope rating.See Driving on a Slope in the OperatingInstructions section. If the slope of the transport vehicle bedexceeds the uphill or downhill maximum sloperating, the machine must be loaded andunloaded using a winch as described in thebrake release operation. See theSpecifications section for the slope ratings.Free-wheel Configuration forWinchingChock the tracks to prevent the machine fromrolling.Release the trackbrakes by turning overall four drive hubdisconnect caps.Be sure the winch line is properly secured to thedrive chassis tie points and the path is clear of allobstructions.Reverse the procedures described to re-engagethe brakes.Note: The pump free-wheel valve should alwaysremain closed.