Genie Z-62/40 TRAX Operator's Manual

Also see for Z-62/40 TRAX: Maintenance manual Maintenance manual Maintenance manual Operator's manual supplement

Contents

First Edition • Second Printing Operator's ManualMaintenancePart No. 1272873GT Z ® -62/40 TRAX™ 57Maintenanc eObserve and Obey: Only routine maintenance items specified inthis manual shall be performed by the operator. Scheduled maintenance inspections shall becompleted by qualified service technicians,according to the manufacturer’s specificationsand the requirements specified in theresponsibilities manual. Use only Genie approved replacement parts.Maintenance Symbols LegendThe following symbols have been used in thismanual to help communicate the intent of theinstructions. When one or more of the symbolsappear at the beginning of a maintenanceprocedure, it conveys the meaning below.Indicates that tools will be required toperform this procedure.Indicates that new parts will be required toperform this procedure.Indicates that a cold engine is requiredbefore performing this procedure.Check the Engine Oil LevelMaintaining the proper engine oil level is essentialto good engine performance and service life.Operating the machine with an improper oil levelcan damage engine components.Note: Check the oil level with the engine off.1 Check the oil level dipstick. Add oil as needed.Deutz TD2.9 L4 EngineOil type 15W-40Oil type - cold conditions 5W-30Diesel Fuel RequirementsSatisfactory engine performance is dependent onthe use of a good quality fuel. The use of a goodquality fuel will give the following result: longengine life and acceptable exhaust emissionslevels.Minimum diesel fuel requirements for each engineare listed below.Deutz TD2.9 L4 EngineFuel Type Ultra Low Sulfur Diesel (ULSD)