Installation ManualH3C S5600 Series Ethernet Switches Chapter 1 Product Overview1-12II. LEDsThe S5600-50C/S5600-50C-PWR provides one power LED, RPS LED, fabric LED,module LED, mode LED, 7-segment digitron display, 1000 Mbps SFP port status LED,and auto-negotiation Ethernet port status LED on its front panel. The meaning of eachLED is shown in Table 1-3III. Console portThe S5600-50C/S5600-50C-PWR provides an EIA/TIA-232-compliant console port,which enables you to configure the switch from the local or remote site. For theattributes of the port, refer to Table 1-5.1.3.2 Rear panelI. Rear panelNote:The ports of the AC/DC dual input power module and the PoE power module areexactly the same, so only one rear panel illustration is shown below.The S5600-50C/S5600-50C-PWR provides two sockets for pluggable power module,two fabric ports, one expansion slot, and one grounding screw on its rear panel, asshown in the following figure.(1) AC-input power socket for the power module (2) Expansion module(3) Grounding screw (4) Fabric ports(5) Fabric port LEDs (6) RPS LED(7) DC-input power socket for the power moduleFigure 1-5 Rear panel of the S5600-50C/S5600-50C-PWRII. Fabric portsFor fabric ports and the meanings of their LEDs, refer to Table 1-6.