Command Manual – MSTPH3C S3100-52P Ethernet Switches Chapter 1 MSTP Configuration Commands1-23Caution:Among loop prevention function, root protection function and edge port setting, onlyone can be valid on a port at one time.Example# Configure Ethernet1/0/3 as an edge port in system view. system-viewSystem View: return to User View with Ctrl+Z.[H3C] stp interface Ethernet 1/0/3 edged-port enable1.1.21 stp interface loop-protectionSyntaxstp interface interface-list loop-protectionundo stp interface interface-list loop-protectionViewSystem viewParameterinterface-list: Ethernet port list. You can specify multiple Ethernet ports by providing thisargument in the form of interface-list = { interface-type interface-number [ tointerface-type interface-number ] } &<1-10>, where &<1-10> means that you canprovide up to 10 port indexes/port index ranges for this argument.DescriptionUse the stp interface loop-protection command to enable the loop preventionfunction in system view.Use the undo stp interface loop-protection command to restore the default state ofthe loop prevention function in system view.The loop prevention function is disabled by default.Related command: stp loop-protection.