H3C S3610 Series Command Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

H3C S3610 Series Command Manual Manual pdf 18 page image

Command Manual – System Maintaining and DebuggingH3C S3610&S5510 Series Ethernet Switches Chapter 1 Basic Configuration Commands1-16* Copyright (c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.** Without the owner's prior written consent, ** no decompiling or reverse-engineering shall be allowed. ***************************************************************************Welcome to legal(header legal)Press Y or ENTER to continue, N to exit.Welcome to motd(header motd)Welcome to login(header login)1.1.15 hotkeySyntaxhotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } commandundo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }ViewSystem viewParametersCTRL_G: Assigns the hot key to a command.CTRL_L: Assigns the hot key to a command.CTRL_O: Assigns the hot key to a command.CTRL_T: Assigns the hot key to a command.CTRL_U: Assigns the hot key to a command.command: The command line associated with the hot key.DescriptionUse the hotkey command to assign a hot key to a command line.Use the undo hotkey command to restore the default.By default, the system specifies corresponding commands for , and, while the others are null.z corresponds to display current-configurationz corresponds to display ip routing-tablez corresponds to undo debugging allYou can customize this scheme as needed however.