H3C S3610 Series Command Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

H3C S3610 Series Command Manual Manual pdf 48 page image

Command Manual – System Maintaining and DebuggingH3C S3610&S5510 Series Ethernet Switches Chapter 3 Device Management Commands3-16Field DescriptionTransfer distance(xx)Transfer distance, with xx representing km forsingle-mode transceivers and m for other transceivers. Ifthe transceiver supports multiple transfer medium, everytwo values of the transfer distance are separated by acomma. The corresponding transfer medium is included inthe bracket following the transfer distance value. Thefollowing are the transfer media:z 9 um: 9/125 um single-mode fiberz 50 um: 50/125 um multi-mode fiberz 62.5 um: 62.5/125 um multi-mode fiberz TP: Twisted pairz CX4: CX4 cableDigital DiagnosticMonitoringWhether the digital diagnosis function is supported, where:z YES: supportedz NO: not supportedVendor NameVendor name or vendor name specified of the transceiver:z The anti-spoofing transceiver customized by H3C: H3Cis displayed.z Other transceivers: The original vendor name isdisplayed.Ordering Name Ordering name of the transceiver3.1.15 display transceiver manuinfo interfaceSyntaxdisplay transceiver manuinfo interface [ interface-type interface-number ]ViewAny viewParametersinterface-type interface-number: Interface type and interface number.DescriptionUse the display transceiver manuinfo interface command to display part of theelectrical label information of a single or all anti-spoofing pluggable transceiverscustomized by H3C.Examples# Display part of the electrical label information of the anti-spoofing pluggabletransceiver customized by H3C on interface GigabitEthernet 1/1/4. display transceiver manuinfo interface gigabitethernet 1/1/4