H3C S3610 Series Command Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

H3C S3610 Series Command Manual Manual pdf 7 page image

Command Manual – System Maintaining and DebuggingH3C S3610&S5510 Series Ethernet Switches Chapter 1 Basic Configuration Commands1-5undo clock timezoneViewUser viewParameterszone-name: Time zone name, a string of 1 to 32 characters. It is case sensitive.add: Positive offset to universal time coordinated (UTC) time.minus: Negative offset to UTC time.zone-offset: In the format of HH/MM/SS (hours/minutes/seconds), where HH is hours inthe range 0 to 23, MM is minutes in the range 0 to 59, and SS is seconds in the range 0to 59. The zeros in the argument can be omitted except for indicating 0 hours.DescriptionUse the clock timezone command to set the local time zone.Use the undo clock timezone command to restore the local time zone to the defaultUTC time zone.By default, the local time zone is UTC zone.After the configuration takes effect, use the display clock command to view the result.The information such as log file and debug adopts the local time modified by time-zoneand daylight saving time.Related commands: clock datetime, clock summer-time one-off, clocksummer-time repeating, display clock.Examples# Set the name of the local time zone to Z5, five hours ahead of UTC time. clock timezone z5 add 51.1.5 command-privilegeSyntaxcommand-privilege level level view view commandundo command-privilege view view commandViewSystem viewParameterslevel level: Command level, in the range 0 to 3.view view: Specifies a view.