H3C S3610 Series Command Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

H3C S3610 Series Command Manual Manual pdf 33 page image

Command Manual – System Maintaining and DebuggingH3C S3610&S5510 Series Ethernet Switches Chapter 3 Device Management Commands3-1Chapter 3 Device Management CommandsNote:File names in this document comply with the following rules:z Path + file name (namely, a full file name): File on a specified path. A full file nameconsists of 1 to 135 characters.z “File name” (namely, only a file name without a path): File on the current workingpath. The file name without a path consists of 1 to 91 characters.3.1 Device Management Commands3.1.1 boot-loaderSyntaxboot-loader file file-urlViewUser viewParametersfile file-url: Specifies a file name, a string of 1 to 64 characters.DescriptionUse the boot-loader command to specify a host file for next boot.Related commands: display boot-loader.Examples# Specify the host file for next boot as plat.bin. boot-loader file plat.binThis command will set the boot file, Continue? [Y/N]:yThe specified file will be used as the boot file at the next reboot!