H3C S5120-EI series Installation Manual

Also see for S5120-EI Series: Configuration guide Installation manual Configuration guide Configuration guide Operation manual

Contents

H3C S5120-EI series Installation Manual Manual pdf 13 page image

5NOTE:The S5120-28C-EI, S5120-52C-EI, S5120-28C-PWR-EI, and S5120-52C-PWR-EI support IRF. For moreinformation, see "Setting up an IRF fabric."Installing the switch into a 19-inch rackInstallation methodsYou can install a switch into a 19-inch standard rack in one of the following ways:• Use front mounting brackets• Use front mounting brackets and a rack-shelf• Use front mounting brackets and rear mounting bracketsThe installation methods of a switch depend on the depth of the switch. For the specific installationmethods, see Table 3.Table 3 Installation methodsMethod Use front mountingbracketsUse front mountingbrackets and a rack-shelfUse front and rearmounting bracketsDepth300 mm (11.81 in) √ √ N/A420 mm (16.54 in) N/A √ √NOTE:For a switch with a depth greater than 300 mm (11.81 in), the front mounting brackets only secure theswitch rather than bear its weight.Mounting bracketFigure 2 Appearance of a standard front mounting bracket(1) Screw hole for attaching the mounting bracket to the cabinet (Use one M6 screw)(2) Screw hole for attaching the switch to the mounting bracket