36To do... Use the command... RemarksEnter system view system-view —Enable link-aggregation trafficredirectionlink-aggregation lacptraffic-redirect-notification enableOptionalDisabled by default.CAUTION:• Link-aggregation traffic redirection applies only to dynamic link aggregation groups and only to knownunicast packets.• To prevent traffic interruption, enable link-aggregation traffic redirection on devices at both ends of theaggregate link.• To prevent packet loss that might occur at a reboot, disable both MSTP and link-aggregation trafficredirection.Displaying and maintaining Ethernet linkaggregationTo do... Use the command... RemarksDisplay information for anaggregate interface or multipleaggregate interfacesdisplay interface bridge-aggregation [ brief[ down ] ] [ | { begin | exclude | include }regular-expression ]display interface bridge-aggregationinterface-number [ brief ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay the local system ID display lacp system-id [ | { begin | exclude |include } regular-expression ] Available in any viewDisplay the global orgroup-specific link-aggregationload sharing criteriadisplay link-aggregation load-sharing mode[ interface [ bridge-aggregationinterface-number ] ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay detailed link aggregationinformation on link aggregationmember portsdisplay link-aggregation member-port[ interface-list ] [ | { begin | exclude | include }regular-expression ]Available in any viewDisplay the summary of allaggregation groupsdisplay link-aggregation summary [ | { begin |exclude | include } regular-expression ] Available in any viewDisplay detailed information abouta specific or all aggregationgroupsdisplay link-aggregation verbose[ bridge-aggregation [ interface-number ] ] [ |{ begin | exclude | include } regular-expression ]Available in any viewClear LACP statistics for a specificor all link aggregation memberportsreset lacp statistics [ interface interface-list ] Available in userviewClear statistics for a specific or allaggregate interfacesreset counters interface [ bridge-aggregation[ interface-number ] ]Available in userview
