62Task RemarksConfiguring the port priority OptionalConfiguring the port link type OptionalEnabling the output of port state transition information OptionalEnabling the spanning tree feature RequiredPerforming mCheck OptionalConfiguring the VLAN Ignore feature OptionalConfiguring protection functions OptionalEnabling SNMP notifications for PVST topology changes OptionalMSTP configuration task listComplete the following tasks to configure MSTP:Task RemarksConfiguring the rootbridgeSetting the spanning tree modeOptionalBy default, the device worksin MSTP mode.Configuring an MST region RequiredConfiguring the root bridge or a secondary rootbridge OptionalConfiguring the device priority OptionalConfiguring the maximum hops of an MST region OptionalConfiguring the network diameter of a switchednetwork OptionalConfiguring spanning tree timers OptionalConfiguring the timeout factor OptionalConfiguring the maximum port rate OptionalConfiguring edge ports OptionalConfiguring the port link type OptionalConfiguring the mode a port uses to recognize/sendMSTP packets OptionalEnabling the output of port state transition information OptionalEnabling the spanning tree feature RequiredConfiguring the leafnodesSetting the spanning tree modeOptionalBy default, the device worksin MSTP mode.Configuring an MST region RequiredConfiguring the device priority OptionalConfiguring the timeout factor Optional
