48Appendix B FRUs and compatibilitymatrixesPower modules and compatibility matrixesThe S5150X-16S-EI and S5150-24S-PWR-EI switches support hot swapping of power modules.The following table describes power modules available for the switch.Power modules S5150X-16S-EI S5150-24S-PWR-EIPSR150-A1 Supported N/APSR150-D1 Supported N/APSR360-56A N/A SupportedPSR720-56A N/A SupportedPSR1110-56A N/A SupportedThe PSR360-56A, PSR720-56A, PSR1110-56A, PSR150-A1, and PSR150-D1 power modulessupport asset management. You can use the display device manuinfo command to view the name,sequence number, and vendor of the power modules you have installed on the device.You can install one power module, or two power modules for redundancy on the S5150X-16S-EIswitch. The switch supports mix of an AC power module and a DC power module.You can install one power module, or two power modules for redundancy on the S5150-24S-PWR-EIswitch. The PoE capabilities of these switches vary by power module configuration. For moreinformation, see Table 12.Hot swappable power modulesPower module Specifications ReferencePSR150-A1• Rated input voltage range: 100 VACto 240 VAC @ 50 Hz or 60 Hz• Max input voltage range: 90 VAC to264 VAC @ 47 Hz to 63 Hz• Max output power: 150 WH3C PSR150-A & PSR150-DSeries Power Modules UserManualPSR150-D1• Rated input voltage range: –48 VDCto –60 VDC• Max input voltage range: –36 VDC to–72 VDC• Max output power: 150 WH3C PSR150-A & PSR150-DSeries Power Modules UserManualPSR360-56A• Rated input voltage range: 100 VACto 240 VAC @ 50 Hz or 60 Hz• Max input voltage range: 90 VAC to264 VAC @ 47 Hz to 63 Hz• Max output power: 360 WH3C PSR360-56A Power ModuleUser Manual