H3C S5150-EI Series Installation Manual

Also see for S5150-EI Series: Troubleshooting guide Configuration guide Command reference

Contents

50Appendix C Ports and LEDsPortsConsole portThe switch has two console ports: a serial console port and a mini USB console port.Table 13 Console port specificationsItem Serial console port Mini USB console portConnector type RJ-45 Mini USB-Type BCompliant standard EIA/TIA-232 USB 2.0Transmission baud rate 9600 bps (default) to 115200 bpsServices• Provides connection to an ASCIIterminal.• Provides connection to the serial portof a local or remote (through a pair ofmodems) PC running terminalemulation program.Provides connection to the USB portof a local PC running terminalemulation program.Management Ethernet portAll S5150-EI switches except for the S5150-24S-PWR-EI provide a management Ethernet portstatus LED on the front panel. You can connect the management Ethernet port to a PC ormanagement station for loading and debugging software or remote management.Table 14 Management Ethernet port specificationsItem SpecificationConnector type RJ-45Port transmission rate10/100 Mbps, half/full duplex1000 Mbps, full duplexMDI/MDI-X auto-sensingTransmission medium and maxtransmission distance 100 m (328.08 ft) over category-5 twisted pair cableStandards IEEE 802.3i, 802.3u, 802.3abFunctions and services Switch software and Boot ROM upgrade, network managementUSB portThe switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to480 Mbps. You can use this USB port to access the file system on the flash of the switch, for example,to upload or download application and configuration files.