418Task Command RemarksDisplay information aboutjoin/prune messages to send.display pim ipv6 join-prune mode{ sm [ flags flag-value ] | ssm }[ interface interface-typeinterface-number | neighboripv6-neighbor-address ] *[ verbose ] [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay IPv6 PIM neighboringinformation.display pim ipv6 neighbor[ interface interface-typeinterface-number |ipv6-neighbor-address | verbose ]* [ | { begin | exclude | include }regular-expression ]Available in any viewDisplay information about the IPv6PIM routing table.display pim ipv6 routing-table[ ipv6-group-address[ prefix-length ] |ipv6-source-address[ prefix-length ] |incoming-interface [ interface-typeinterface-number | register ] |outgoing-interface { include |exclude | match } { interface-typeinterface-number | register } |mode mode-type | flags flag-value| fsm ] * [ | { begin | exclude |include } regular-expression ]Available in any viewDisplay the RP information.display pim ipv6 rp-info[ ipv6-group-address ] [ | { begin |exclude | include }regular-expression ]Available in any viewReset IPv6 PIM control messagecounters.reset pim ipv6 control-messagecounters [ interface interface-typeinterface-number ]Available in user viewIPv6 PIM configuration examplesIPv6 PIM-DM configuration exampleNetwork requirementsReceivers receive VOD information through multicast. The receiver groups of different organizations formstub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM domain isoperating in the dense mode.Host A and Host C are multicast receivers in two stub networks N1 and N2.MLDv1 runs between Switch A and N1 and between Switch B/Switch C and N2.
