83IMPORTANT:USB devices from different vendors vary in compatibilities and drivers. H3C does not guaranteecorrect operation of USB devices from all vendors on the S5560S-28DP-SI switch. If a USB devicefails to operate on the switch, replace it with one from another vendor.10/100BASE-T autosensing Ethernet portThe S3100V3-SI switch series provides 10/100 BASE-T autosensing Ethernet ports.Table 26 10/100BASE-T autosensing Ethernet port specificationsItem SpecificationConnector type RJ-45Port attribute 10/100 Mbps, half/full duplex, MDI/MDI-X autosensingMax transmission distance 100 m (328.08 ft)Transmission medium Category-5 and above twisted pair cableCompatible standards IEEE 802.3i, 802.3u, 802.3ab10/100/1000BASE-T autosensing Ethernet portTable 27 10/100/1000BASE-T autosensing Ethernet port specificationsItem SpecificationConnector type RJ-45Port attribute• 10 Mbps, half/full duplex• 100 Mbps, half/full duplex• 1000 Mbps, full duplex• MDI/MDI-X autosensingMax transmission distance 100 m (328.08 ft)Transmission medium Category-5 (or above) twisted pair cableCompatible standards IEEE 802.3i, 802.3u, 802.3abSFP portThe S5560S-28P-SI switch, S5560S-52P-SI switch, S5560S-28F-SI switch, S5560S-28DP-SI,S5130S-28F-SI switch, S5130S-28S-HPWR-LI, S5120V2-SI switch series, S5120V2-LI switchseries, S5110V2-SI switch series, S5000V3-EI switch series, S5500V3-SI switch series, andS3100V3-SI switch series provide SFP ports. The SFP ports on these switches support GE SFPtransceiver modules and cables described in Table 28.Only the following SFP ports and switches support FE SFP transceiver modules described in Table29.• All SFP ports on the S5560S-28F-SI, S5130S-28F-SI, S5130S-28S-HPWR-LI,S5120V2-28P-HPWR-LI, and S3100V3-28TP-PWR-SI switches.• SFP ports 17 to 24 on an S5560S-28DP-SI switch.• SFP ports 9 and 10 on an S5120V2-12TP-HPWR-LI switch.
