H3C S5810-50S Installation Manual

Also see for S5810-50S: Quick start

Contents

5-6Enter your choice(0-3):The items in the protocol parameter setting menu are described in Table 5-4.Table 5-4 Description of the protocol parameter setting menuItem Description1. Set TFTP protocol parameter Set TFTP parameters2. Set FTP protocol parameter Set FTP parameters3. Set XMODEM protocol parameter Set XMODEM parameters0. Return to boot menu Return to the Boot ROM menu3) Configure the switch to download files using XMODEMEnter 3 to enter the download rate setting menu.Please select your download baudrate:1.* 96002. 192003. 384004. 576005. 1152000. ReturnEnter your choice (0-5):4) Set the download rate of the console port on the switchSelect an appropriate download rate. For example, if you select 115200 bps, that is, enter 5, thefollowing information is displayed:Download baudrate is 115200 bpsPlease change the terminal's baudrate to 115200 bps and select XMODEM protocolPress enter key when readyNow that the console communication baud rate of the switch has been changed to 115200 bps whilethat of the terminal is still 9600 bps, the two sides cannot communicate with each other. According to theprompt, you need to change the baud rate of the terminal to 115200 bps.z Typically, the size of a .bin file is over 10 MB. Even at a baud rate of 115200 bps, the update takestens of minutes.z If you select 9600 bps as the download rate, you can skip the step Change the rate of the serial porton the terminal.5) Change the rate of the serial port on the terminalTo ensure communication between the terminal and the switch, the baud rate of the serial port on theterminal should be consistent with that of the console port on the switch.Step1 Select Call > Disconnect in the HyperTerminal window to disconnect the terminal from the switch.