H3C S5810-50S Installation Manual

Also see for S5810-50S: Quick start

Contents

5-20z After loading the application file, use the reboot command to restart the switch to make the updatetake effect (make sure you have saved other configurations before restart).z If the flash memory does not have enough space, you can load the Boot ROM file first, and thendelete certain application files from the flash memory (you are recommended to delete the unusedhost program files); then, load the application file to the switch through FTP for update.z Avoid any power failure during the loading process.Loading Software Using TFTPLoading a file through TFTP is similar to loading a file through FTP. The switch can serve only as aTFTP client that downloads the file from the TFTP server to its flash memory. The procedure afterdownload is the same as loading the file remotely through FTP.