16-11To do… Use the command… RemarksSpecify a log host and configurethe parameters when systeminformation is output to the loghostinfo-center loghost[ vpn-instancevpn-instance-name ]host-ipv4-address [ portport-number ] [ channel{ channel-number |channel-name } | facilitylocal-number ] *RequiredBy default, the system does notoutput information to a log host.If you specify to output systeminformation to a log host, thesystem uses channel 2 (loghost)by default.The value of the port-numberargument should be the sameas the value configured on thelog host, otherwise, the log hostcannot receive systeminformation.Configure the output rules of thesystem informationinfo-center source{ module-name | default }channel { channel-number |channel-name } [ debug { levelseverity | state state } * | log{ level severity | state state } * |trap { level severity | statestate } * ] *OptionalRefer to Default Output Rules ofSystem Information.Specify the source IP addressfor the log informationinfo-center loghost sourceinterface-type interface-numberOptionalBy default, the source interfaceis determined by the matchedroute, and the primary IPaddress of this interface is thesource IP address of the loginformation.When the current interface isassociated with a specified VPNinstance, the source IP addressspecified by this command isinvalid.Configure the format of the timestamp for system informationoutput to the log hostinfo-center timestamp loghost{ date | no-year-date | none }Optionaldate by default.Outputting System Information to the Trap Buffer
